| |
Normally, powder booth can be seperated by the recovery method.
In addition, there
are two main technologies to recovery the powder material, which
are cartridge
filter and cyclone techniques.
In each technique, there are advantages and disadvantages, such
that, to design which
applicator is suitable for your products, it depends largely
on your requirements.
Please contact us, if you need our assistance. Nordson provides
you both types of the
techniques with high-end design and technology to help you improve
your process,
such as to reduce color-change time, etc.
As for your references, some technologies of our Nordson powder
booth can be shown as:
1)
ColorMax Spray System
The Nordson ColorMax
powder spray and recovery system is designed for quick 10-to-15
minute color changes with high system efficiency, optimum airflow
and maximum powder usage to meet today's flexible manufacturing
system environments. Several system features minimize powder-in-process,
promote easy booth cleaning, and provide fast powder-supply-system
changes.
 The
fully
integrated approach of the ColorMax
system substantially
reduces labor cost, downtime and material
waste in multi-color powder coating
applications. With this enhanced operating
flexibility, powder coaters are able to manage smaller batches
and a wide range of colors to fit just-in-time production schedules.
• Non-conductive booth and canopy
minimize powder retention
inside system during operation
• Hinged cyclone
sections provide easy operator access for inspection and easy
cleaning
•
AeroDeck air distribution system uses high air velocities
over 0.7 m/sec (140 ft/min) to ensure improved powder containment
in the air stream
• AeroWash air knives reduce powder-in-process for maximum
powder use with minimal color-change time
• No inlet ductwork ensures
easy visual inspection of areas of the system that could cause
contamination between colors
• Sure Coat gun control system with patented Select
Charge technology provides application-specific coating
modes for unmatched application efficiency
2) Excel2000 or EnviroCoat Spray System
Each major component of the Nordson Excel 2000 powder spray
booth, including the filters, collector/color module, canopy
and fan section, have been designed to facilitate uniform, constant
air flow. The result is a total air management system that brings
powder coating to a new standard of performance.
This integrated system approach delivers more efficient  powder
recovery, enhanced collector efficiency and superior part coverage.
Several versions are available to accommodate a variety of production
requirements.
• Unique cartridge pleat design
increases effective surface area and reduces powder waste by
80 percent
• Inflatable pneumatic seal provides air-tight connection
between collector module and fan section
• Aerodynamic canopy design minimizes dead zones and reduce
turbulence for more consistent air flow
• Unitized construction of integrated booth base, collector
and fan section provides a better seal
There are some documents related to our Nordson booth, which
are:
1) Case
Study - Quick Color Change
2) Powder
Coating on Plastic
3) Converting
from Liquid to Powder
4) Powder
on Wood
There are a lot more references about our Nordson powder
system. Please contact
us for more information.
All information in this website are from http://www.nordson.com,
which is our parent website.
Top
|
|
|
|
