1) Hydraulic Pressure Regulators
Pressure regulators reduce pressure drops during production line stops to provide accurate cold adhesive flow and improve pattern performance.

LA 380 Regulator
• Maintain precise bead volume in variable-speed applications.
• Reduce pressure drops near the point of application by locating regulator at guns.
• Extend service life, even with aggressive adhesives.

WM 370 Regulator
• Use interchangeable ratio rings for application-specific regulation, regardless of adhesive viscosity.
• Maintain bead volume during emergency stops with lid-mount installation on WM 360 piston pumps and up to two regulators per assembly.
• Reduce hammerheads with dump-back function.

2) WM 302 Pressure Control
Automatic pressure-to-line speed control maintains consistent cold adhesive output from pneumatic guns at varying line speeds for converting, packaging and product assembly applications.

• Use as stand-alone control or in conjunction with Nordson pattern controls to provide run-up.
• Regulate adhesive flow to multiple pneumatic guns using two outputs.
• Minimize downtime with diagnostics that indicate line speed below setpoint and gun status.
• Set up parameters easily with selector switch and control knobs.

3) LA 404 Pattern Control Systems
Versatile pattern control provides multi-channel capability and a choice of adhesive bead types to meet a range of applications, including packaging, folding carton, envelope, and bag and sack manufacturing.

• Complete changeovers quickly with 50-program memory.
• Maintain bead volume during line speed changes with run-up capability.
• Use in applications up to 600 meters per minute (1,969 fpm) with pattern accuracy of ±1 millimeter.
• Control up to four channels with four bead events per channel for applying dot, stitch or modulated patterns.
• Program gun driver to control up to eight electric guns or 10 pneumatic guns.

4) WM 500 Detection System
Advanced detection system monitors adhesive volume, placement and position, reducing product waste and increasing quality in intermittent and continuous packaging and converting applications.

• Monitor adhesive deposition, even through folded substrates, at line speeds up to 1,000 meters per minute (3,333 fpm).
• Reduce waste with detection of beginning, end and volume of applied adhesive; product skewing, overlap and carton length.
• Establish reference levels with dynamic calibration.
• Enhance quality with up to four sensors that identify faulty products, which can trigger an alarm, ejection or marking.
• Improve efficiency using product counter and optional printer module for production reports.

5) G-NET Verification System
Comprehensive on-line quality control network provides adhesive pattern detection, product inspection and production measurement. The integrated system increases product quality and reduces waste in packaging, converting and product assembly operations.

• Detect and monitor specific pattern and product features at line speeds up to 700 meters per minute (2,300 fpm).
• Protect product integrity by inspecting adhesive position and placement, bar codes, cellophane windows, print-to-cut registration, feeding, orientation and flap faults.
• Enhance quality assurance with up to four triggers and eight sensors that identify faulty products, which can be tracked, pushed, ejected or marked during production.
• Improve efficiency using line-speed readout, adhesive pattern display, product counting, monitoring alarms and production reports.

There are more products than those shown here in our website to suit with your requirement. Please contact us for more information.

All information in this website are from http://www.nordson.com, which is our parent website.

Top